Main page » Pcbs & Panels

Pcbs & Panels

PCB-only VDD 5002-01 Dual Symetric Output Module

PCB only

5,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

PCB and Panel only VDD 5002-01 Dual Symetric Output Module

PCB and Panel only,
unpopulated pcb
https://diysynth.wiki.dsl-man.de/wiki/spaces/CHECKMATE/pages/688648/VDD+5002-01+DUAL+SYMMETRIC+OUTPUT+Module

9,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Arp1601 Clone PCB

back in Stock - limited Stock .
Shipping from Germany

The bundle includes:
1x 1601 pcb rev6b
1x clockdivider pcb
1x step1 fix pcb
3x keycaps included

The panelfile is avaible after purchase to make your own !!

Buildguide and BOM
https://diysynth.wiki.dsl-man.de/wiki/spaces/TTSHADDONS/pages/1442408/BOM+for+rev.+6b

BOM for the Clockdivider:
https://diysynth.wiki.dsl-man.de/wiki/spaces/TTSHADDONS/pages/1442404/1601+Mods

105,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

VDD Active Splitter and Buffered Multiple

70,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

VDD Active Splitter und Buffered Multiple - PCB Set

The internal Name: "VDD 3007", has 2 independent functions:
- Active (Audio) Splitter 2 Inputs and 14 Outputs (schaltbar 1 Eingang
plus
- Buffered Multiple with 2 Inputs and 14 Outputs

The PCB Set+ contains:
3 PCBs (ucb, lcb, control)
2x Ferritebeads

(ROHS - leadfree)
https://diysynth.wiki.dsl-man.de/wiki/spaces/MAIN/pages/1705308/VDD+3007+active+Splitter+buffered+Multiple

38,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Syncussion Clone Power fix PCB

A small PCB which adds a clean -8V. - to improve the hum/noise problems on the SY-1 (THC Version)
and on few SY-1M the coil problem.
note: you must desolder few parts from the pcb and you must solder SMT parts.
there are 2 further options in this store, assembled version and "repair service"

a buildguide and BOM is available on www.DSL-man.de
https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1147404/Syncussion+Power+Modification

The PCB is designed to mount it between Control PCB and analogboard
unpopulated PCB

10,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Syncussion Clone Power fix, assembled pcb

Note: assembled version - 1-2week required to assemble it - build to order
A small PCB which adds add a clean -8V. - to improve the hum/noise problems on the SY-1 (THC Version)
and on few SY-1M the coil problem.
note: you must desolder few parts from the pcb and before install this pcb, or buy the "repair service" from me.
a buildguide and BOM is available on:
https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1147404/Syncussion+Power+Modification

The PCB is designed to mount it between Control PCB and analogboard

27,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

STP4012 VCF MOTM

Arp4012 based VCF mit CV Resonance,
designed in UK
grey panel only avaible
unpopulated PCBs and Panel
3U wide
5U height
power 15/-15V ca.60mA

https://diysynth.wiki.dsl-man.de/wiki/spaces/MAIN/pages/1705300/STP4012+MOTM

80,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Syncussion Clone Power Change service

Note: assembled version
A small PCB which adds add a clean -8V. - to improve the hum/noise problems on the SY-1 (THC Version)
and on few SY-1M the coil problem.
note: you must desolder few parts from the pcb and before install this pcb, or buy the "repair service" from me.
a buildguide and BOM is available very soon on www.DSL-man.de

The PCB is designed to mount it between Control PCB and analogboard

https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1147404/Syncussion+Power+Modification

70,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

DDRM Stereo MOD pcb

DDRM Stereo MOD pcb
https://diysynth.wiki.dsl-man.de/wiki/spaces/DDRM/pages/1704720/DDRM+Stereo+Out+Modification

9,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

SMT EDU Testboard pcb-only

SMT EDU TEST BOARD - PCB only

5,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

SMT EDU Testboard PCB and Parts

SMT EDU TEST BOARD - PCB with some parts (not all)
2 Elektrolyte-caps, 10 mixed resistors, 5 capactitors, 4 diodes/rectifier, 2 ICs, 4 Transistors, 1 Microcontroller

12,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

MOTM-MU-Adapter PCB with cable- assembled

assembled MOTM-MU-Adapter PCB with 15cm MOTM cable

14,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

SOIC16 to DIP16 Adapter

SOIC16 to DIP16 Adapter PCB only

0,60 EUR

VAT exempt according to current tax regulations excl. Shipping costs

TTSH VCO PCB blank arp4027

1x TTSH VCO 4027 blank PCB

12,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

TTSH Balanced Driver PCB

unpopulated Balanced Driver PCB for THAT1646 OPamps for balanced - Symmetric outputs.
XLR supported by the TRS Header.
the 6.3mm jack is optional

the circuit works for 12V/-12V up to 18V/-18V

BOM und Buildguide:
https://diysynth.wiki.dsl-man.de/wiki/spaces/TTSH/pages/1310802/Balanced+Driver

10,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

RE-303 Potentiometer Adapter

Pot Adapter for TB-303 /RE-303 - to use Alpha Potentiometers.

Pots not included
Described here:
https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1147609/RE-303+-+not+a+further+clone#Potentiometer-Modification:

11,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

BIPO bipolar DIY PSU PCB

this Powersupply PCB was designed by me with my own requirements, especially for the TTSH and other -12/-15V/-18V + 12/+15/+18V DC outputs
Fuses for Input and Output
massive Terminal connectors
different options to mount the LM337/LM317

more infos and BOM on:
https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1146898/Bipolar+Powersupply+BIPO

14,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Clock Divider PCB for Arp1601

A Clock Divider PCB unpopulated for ARP 1601 Sequencers and 1601/1621Clones

Sale is valid until stock is empty. (backlog sale)

more infos:
https://diysynth.wiki.dsl-man.de/wiki/spaces/TTSHADDONS/pages/1442404/1601+Mods

*ARP1601 is a registered Name by KORG

8,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Kijimi Output Mod PCB

This PCB is only for the DIY Version of the Kijimi.
The PCB is unpopulated and contains 2 pcbs - one for the Potentiometer and one for the Jacks.
You get 8 Outputs 1/per Voice and one LEFT and RIGHT Output.
You can change the balance/Panorama for each voice.

an build guide is on my website:
https://diysynth.wiki.dsl-man.de/wiki/spaces/KIJIMI/pages/1015859/Kijimi+Modifications

23,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

1 to 20 (from a total of 33)