the new DIYSYNTH source

Main page » diysynth.de

diysynth.de
diysynth.de

2N3958 tested

tested 2N3958

14,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

PCB and Panel only VDD 5002-01 Dual Symetric Output Module

PCB and Panel only,
unpopulated pcb
https://diysynth.wiki.dsl-man.de/wiki/spaces/CHECKMATE/pages/688648/VDD+5002-01+DUAL+SYMMETRIC+OUTPUT+Module

9,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Arp1601 Clone PCB

back in Stock - limited Stock .
Shipping from Germany

The bundle includes:
1x 1601 pcb rev6b
1x clockdivider pcb
1x step1 fix pcb
3x keycaps included

The panelfile is avaible after purchase to make your own !!

Buildguide and BOM
https://diysynth.wiki.dsl-man.de/wiki/spaces/TTSHADDONS/pages/1442408/BOM+for+rev.+6b

BOM for the Clockdivider:
https://diysynth.wiki.dsl-man.de/wiki/spaces/TTSHADDONS/pages/1442404/1601+Mods

105,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Syncussion Clone Power fix PCB

A small PCB which adds a clean -8V. - to improve the hum/noise problems on the SY-1 (THC Version)
and on few SY-1M the coil problem.
note: you must desolder few parts from the pcb and you must solder SMT parts.
there are 2 further options in this store, assembled version and "repair service"

a buildguide and BOM is available on www.DSL-man.de
https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1147404/Syncussion+Power+Modification

The PCB is designed to mount it between Control PCB and analogboard
unpopulated PCB

10,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

STP4012 VCF MOTM

Arp4012 based VCF mit CV Resonance,
designed in UK
grey panel only avaible
unpopulated PCBs and Panel
3U wide
5U height
power 15/-15V ca.60mA

https://diysynth.wiki.dsl-man.de/wiki/spaces/MAIN/pages/1705300/STP4012+MOTM

80,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Syncussion Clone Power Change service

Note: assembled version
A small PCB which adds add a clean -8V. - to improve the hum/noise problems on the SY-1 (THC Version)
and on few SY-1M the coil problem.
note: you must desolder few parts from the pcb and before install this pcb, or buy the "repair service" from me.
a buildguide and BOM is available very soon on www.DSL-man.de

The PCB is designed to mount it between Control PCB and analogboard

https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1147404/Syncussion+Power+Modification

70,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

DDRM Stereo MOD pcb

DDRM Stereo MOD pcb
https://diysynth.wiki.dsl-man.de/wiki/spaces/DDRM/pages/1704720/DDRM+Stereo+Out+Modification

9,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

MOTM-MU-Adapter PCB

MOTM Dotcom Adapter PCB
(PCB motm MTA156 4 pole to MTA100 6pole)

2,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

SMT EDU Testboard pcb-only

SMT EDU TEST BOARD - PCB only

5,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

SMT EDU Testboard PCB and Parts

SMT EDU TEST BOARD - PCB with some parts (not all)
2 Elektrolyte-caps, 10 mixed resistors, 5 capactitors, 4 diodes/rectifier, 2 ICs, 4 Transistors, 1 Microcontroller

12,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

MOTM-MU-Adapter PCB with cable- assembled

assembled MOTM-MU-Adapter PCB with 15cm MOTM cable

14,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

SOIC16 to DIP16 Adapter

SOIC16 to DIP16 Adapter PCB only

0,60 EUR

VAT exempt according to current tax regulations excl. Shipping costs

TTSH VCO PCB blank arp4027

1x TTSH VCO 4027 blank PCB

12,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

TTSH Balanced Driver PCB

unpopulated Balanced Driver PCB for THAT1646 OPamps for balanced - Symmetric outputs.
XLR supported by the TRS Header.
the 6.3mm jack is optional

the circuit works for 12V/-12V up to 18V/-18V

BOM und Buildguide:
https://diysynth.wiki.dsl-man.de/wiki/spaces/TTSH/pages/1310802/Balanced+Driver

10,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

RE-303 Potentiometer Adapter

Pot Adapter for TB-303 /RE-303 - to use Alpha Potentiometers.

Pots not included
Described here:
https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1147609/RE-303+-+not+a+further+clone#Potentiometer-Modification:

11,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

SSM2210 direct replacement

Assembled SSM2210 replacement IC with round pins.
1:1 pinout, no modification required.
discount on bigger quantities (more than 3)

5,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

SSM2220 direct replacement

Assembled SSM2220 replacement IC with round pins.
1:1 pinout like the original - no modifcication needed
works perfect like the original
discount on quantities more than 3 items

5,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Kijimi Output Mod PCB

This PCB is only for the DIY Version of the Kijimi.
The PCB is unpopulated and contains 2 pcbs - one for the Potentiometer and one for the Jacks.
You get 8 Outputs 1/per Voice and one LEFT and RIGHT Output.
You can change the balance/Panorama for each voice.

an build guide is on my website:
https://diysynth.wiki.dsl-man.de/wiki/spaces/KIJIMI/pages/1015859/Kijimi+Modifications

23,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

5x5 USB MIDI Interface DIY incl. PIC chip

The 5x5 USB Midi interface is based on the ploytec sources and comes with an preprogrammed chip (not soldered on the pcb)
the PCB is unpopulated

BOM and pictures:
https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1146929/USB+MIDI+Interface

Functions:
USB 2.0 - MIDI Interface - 5 Inputs, 5 outputs, LED status LEDS.

Please note: when the shop stock is on "Main" or "Haupt" it means, the stock is zero - it can happen when you try to order more than one pcb.

25,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

RE-808 - 3D Print Tool Rotaryswitch aid

3D printed part.
you can easily cut the rotary switch of the RE_808 to the exact lenght.
(no switched included in this product)

10,00 EUR

VAT exempt according to current tax regulations excl. Shipping costs

1 to 20 (from a total of 36)