Assembled Devices

Syncussion Clone Power fix, assembled pcb
TOP
Syncussion Clone Power fix, assembled pcb
Note: assembled version - 1-2week required to assemble it - build to order
A small PCB which adds add a clean -8V. - to improve the hum/noise problems on the SY-1 (THC Version)
and on few SY-1M the coil problem.
note: you must desolder few parts from the pcb and before install this pcb, or buy the "repair service" from me.
a buildguide and BOM is available on:
https://diysynth.wiki.dsl-man.de/wiki/spaces/DSO/pages/1147404/Syncussion+Power+Modification

The PCB is designed to mount it between Control PCB and analogboard
27,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Syncussion SY-1M SMT Assembly Service - Kopie
SY-1M   SMT Assembly Service,
parts on addional costs if not supplied with the device

shipping costs back to the customer is included 
Guarantee only on the service rendered according to legal requirements
40,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
LAB PSU Breakoutboard PCB - assembled
LAB PSU Breakoutboard PCB - assembled
This PCB was designed for Pro DIY Builder who wants different Connector to build, test and repair devices or modular modules.
You should have an Bipolar Powersupply to connect this pcb.
There´s a LED test and LED resistor test section
the PCB comes populated
The Banana connectors are for the Inputs of your Lab/Bench PSU - the common 0V can be brigded by the jumpers (if needed)

The banana colour can be different - the shown picture is just an illustration.
30,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
MN3002 replacement
MN3002 replacement
This assembled adapter comes with an TDA1022 BBD 512 stage IC.
the TDA1022 was tested
Was tested in many DIY projects. for example CE-1 Chorus Pedals.
 
42,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Arp1601 Step1 Fix Mod PCB - Kopie
Arp1601 Step1 Fix Mod PCB - Kopie
This Modification helps to syncronize the first step1 to an external source.
when you try to sync from an external source the step2 is in sync with step1 from external.
This Mod fix this issue, for original 1601 and clones

assembled PCB with 2 ICs.
the CD4520 has to be used from your 1601 - and drop this pcb in this place.
 - BOM and buildguide is available on my website DSL-man.de
https://diysynth.wiki.dsl-man.de/wiki/spaces/TTSHADDONS/pages/1442398/Arp1601+Step1fix+Mod
25,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SRE-330 Factory Build
TOP
SRE-330 Factory Build
Oakley Sound Systems - Stereo Ensemble Chorus.
Number 2 of 3 - only 3 will be made.

Detailed information can be found here: Oakley+Sound+Systems+SRE-330+Product+information

Balanced stereo 6.3mm inputs and balanced stereo outputs (6.3mm)

Made in Germany.

WIMA film capacitors gave the limited edition a new look.

This small production run was created due to the discontinuation of WIMA MKS capacitors.

A review can be found here: https://www.amazona.de/test-oakleysound-sre-330-ensemble-chorus-diy/

Included in the box is an external power supply for 230V within the EU.

Outside the EU, a power supply is not included; a flat fee of €30 will be charged separately. (except Swiss)
1.200,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SRE-330 Factory Build - Kopie
TOP
SRE-330 Factory Build - Kopie
Oakley Sound Systems - Stereo Ensemble Chorus.

Detailed information can be found here: Oakley+Sound+Systems+SRE-330+Product+information

Balanced stereo 6.3mm inputs and balanced stereo outputs (6.3mm)

Made in Germany.

WIMA film capacitors gave the limited edition a new look.

This small production run was created due to the discontinuation of WIMA MKS capacitors.

A review can be found here: https://www.amazona.de/test-oakleysound-sre-330-ensemble-chorus-diy/

Included in the box is an external power supply for 230V within the EU.

Outside the EU, a power supply is not included; a flat fee of €30 will be charged separately. (except Swiss)
1.250,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SRE-330 Factory Build - Custombuild
TOP
SRE-330 Factory Build - Custombuild
Oakley Sound Systems - Stereo Ensemble Chorus.

Detailed information can be found here: Oakley+Sound+Systems+SRE-330+Product+information

Balanced stereo 6.3mm inputs and balanced stereo outputs (6.3mm)

Made in Germany.

WIMA film capacitors gave the limited edition a new look.

This small production run was created due to the discontinuation of WIMA MKS capacitors.

A review can be found here: https://www.amazona.de/test-oakleysound-sre-330-ensemble-chorus-diy/

Included in the box is an external power supply for 230V within the EU.

Outside the EU, a power supply is not included; a flat fee of €30 will be charged separately.
1.250,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Oakley Sound Systems ADR30 Delay
TOP
Oakley Sound Systems ADR30 Delay
Oakley Sound ADR30 Delay Effect Unit
In Stock, 1 Unit

Product information:

https://diysynth.wiki.dsl-man.de/wiki/spaces/OUTBOARD/pages/893845508/Oakley+Sound+Systems+ADR30+Product+Information

Includes external power supply for orders within the EU.
without yamaha PA-20 when ordering outside of the EU (except swiss)


 
900,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Oakley Sound Systems DCR320 Factory Build - Custombuild
TOP
Oakley Sound Systems DCR320 Factory Build - Custombuild
Dieser Artikel ist build to order - d.h. wird erst nach der Bestellung auf Kundenwunsch gebaut, die Frontpanelfarbe, Art des Frontpanel kann gewählt werden.
Es stehen verschiedene Eloxal Farben zu Auswahl- gold, schwarz, rot, grün, silber oder 


Genaue Details findet man hier:  https://diysynth.wiki.dsl-man.de/wiki/spaces/OUTBOARD/pages/1147722/Oakleysound+DCR320
Balanced Stereo 6.3mm Eingänge sowie balanced Stereo Ausgänge (6.3mm)


Buildtime around 3-8 weeks



Lieferumfang samt externen Netzteil für 230V innerhalb der EU.
Ausserhalb der EU wird kein Netzteil mitgeliefert, die finanzielle Kompensation erfolgt separat 30€ pauschal. 

Farbauswahl bei Pulverbeschichtung.

Tiefschwarz (RAL9005)

Verkehrsweiß (RAL9016)

Grauweiß (RAL9002)

Lichtgrau (RAL7035)

Graphitgrau (RAL7024)

Signalgrün (RAL6032)

Türkisblau (RAL5018)

Signalblau (RAL5005)

Telemagenta (RAL4010)

Signalrot (RAL3001)

Rubinrot (RAL3003)

Schwefelgelb (RAL1016)

Signalgelb (RAL1003)

Lehmbraun (RAL8003)

Weißaluminium (RAL 9006)

900,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
1 to 10 (from a total of 10)