Pcbs & Panels

Balanced Driver assembled
TOP
populated Balanced Driver PCB for THAT1646 OPamps for balanced - Symmetric outputs.
XLR supported by the TRS Header.
the 6.3mm jack is optional 

the circuit works for 12V/-12V up to 18V/-18V


BOM und Buildguide:
​https://www.dsl-man.de/display/DSO/Balanced+Output+Driver
30,00 EUR
 
VAT exempt according to current tax regulations excl. Shipping costs
BIPO bipolar DIY PSU PCB
this Powersupply PCB was designed by me with my own requirements, especially for the TTSH and other -12/-15V/-18V + 12/+15/+18V DC outputs 
Fuses for Input and Output
massive Terminal connectors
different options to mount the LM337/LM317

more infos and BOM on:
https://www.dsl-man.de/display/DSO/Bipolar+Powersupply+BIPO
12,00 EUR
 
VAT exempt according to current tax regulations excl. Shipping costs
Kijimi Output Mod PCB
TOP
This PCB is only for the DIY Version of the Kijimi.
The PCB is unpopulated and contains 2 pcbs - one for the Potentiometer and one for the Jacks.
You get 8 Outputs 1/per Voice and one LEFT and RIGHT Output.
You can change the balance/Panorama for each voice.

an build guide is on my website:
​https://www.dsl-man.de/display/KIJIMI/Kijimi+Modifications
23,00 EUR
 
VAT exempt according to current tax regulations excl. Shipping costs
LAB PSU Breakoutboard PCB - assembled
This PCB was designed for Pro DIY Builder who wants different Connector to build, test and repair devices or modular modules.
You should have an Bipolar Powersupply to connect this pcb.
There´s a LED test and LED resistor test section
the PCB comes populated
The Banana connectors are for the Inputs of your Lab/Bench PSU - the common 0V can be brigded by the jumpers (if needed)

The banana colour can be different - the shown picture is just an illustration.
25,00 EUR
 
VAT exempt according to current tax regulations excl. Shipping costs
Arp1601 Step1 Fix Mod PCB
NEW
TOP
This Modification helps to syncronize the first step1 to an external source.
when you try to sync from an external source the step2 is in sync with step1 from external.
This Mod fix this issue, for original 1601 and clones
PCB only - BOM and buildguide is available on my website DSL-man.de
https://www.dsl-man.de/display/TTSHADDONS/Arp1601+Step1fix+Mod
8,00 EUR
 
VAT exempt according to current tax regulations excl. Shipping costs
Show 17 to 24 (from a total of 27 products)